http://www.specialprojects.com/equipment/4788/
Rice Barton stainless steel 9" dewatering screw press. The screw trough is 14" side with a dogged lid for easy acess and cleaning. The screw is 9" diameter x 5' long with a # 14 mesh screen to capture solids surrounding it. Solids are driven up and discharge at a height of 68" through a 10.5" x 15" opening. The liquids drain to the bottom of the screw and discharge through a 6" flanged fitting. The screw is belt driven at 1 to 1 ratio by 7.5 hp 1750 rpm electric motor. (motor is missing ,7.5 hp frame 213TC) Screw is feed by 175 gallon tank through a 10" flanged fitting. The tank is open top and measures 30" diameter x 55" straight side height with 4" dish bottom. The dish bottom has a 4" hand operated slide gate valve in center. Tank also has a 18" long 3" flanged piped that exits about 1/3 from the bottom of the tank. There is also a 4" flanged fitting on the bottom side of the tank with an elctronic level indicated. Unit requires 230/460 vac 3 ph electrical supply. Good Condition.
