To help grow this channel consider donating to Patreon:\r
\r
If this is your first time here please click like and smash that subscribe button!\r
\r
Tools Needed:\r
Jack\r
18mm socket for wheel lugs\r
8 mm socket for trim (ideally in a drill/electric driver)\r
Flathead screwdriver for prying\r
small torqx bits for angel eye\r
13mm socket\r
\r
Description:\r
\r
Switching out my headlight bulbs for some 3five 5000k bulbs after a bulb warranty claim. Also removing some colored film from the led angel eye bulb that didnt turn out how I wanted. \r
\r
While you -can- change your headlight bulb through the little flap in the fender liner shown removed, do your self a favor and jack the car up/remove the fender liner. With a drill and a 8mm or 5/16s everything will come off very quickly and make life much easier.\r
\r
The covers on the back of the headlight will probably need to be wrestled with a bit more then mine (a tab broke off the first time I did it) and be prepared for the cover on the angel eye to be a bit of a bear. The trick is to get a screwdriver jammed into the top to release it, then get the bottom to click out without knocking the top back in. \r
\r
The HID bulb holder is pretty easy to push in and to the left out from under the prongs, when reinstalling just push it down to the left of center and slide it back home to the right and release pressure.
