The CLS 4 Section LED Bar is primarily designed for operation using the onboard inbuilt programs or controlled using a DMX Controller.
The CLS 4 Section LED Bar is a low heat, low power lighting solution using 252 10mm LEDs (84R, 84G, 84B) and is perfect for washes, chases, runways and fades or as feature lighting in any environment where vibrant colors are called for. The throw is up to 15 meters (see distance chart below)
These Units allow Mixing of up to 16.7million colors using DMX or users can select from 7 preset colors using onboard dipswitches to create vibrant washes.
There are 2 Bars included with this offer which be independently operated or linked in a Master slave configuration.
The CLS 4 Section LED Bar has over 40 onboard selections including (but not limited to)
Color selection
7 color fade with speed selection
1, 2 or 3 color strobing with speed selection
Chases
Fades
Sound Activation with sensitivity control
DATA
LED Size: 10mm
Source:
Super Bright LEDS
252 pieces 10mm LEDs (84 red, 84 green, 84 blue)
About100 thousand hours rated life
Beam angle: 26°
Colors:
16.7 million colors (24-bit) Capable via DMX
The LEDs used are a mixture of red, green, and blue to produce, via RGB electronic mixing.
Flash rate: 1 to 13fps
Onboard Macros : Over 40 including speed selections, Sound Activation, 7 color fades, 7 Color Select, 4 panel chases
Height: 85mm
Width: 1,070mm
Depth: 650mm
Maximum Recommended Operating Temperature: 40° C
Protocol: DMX-512
Control channels: 12
Operation modes: Master/Slave, standalone, sound
Data in/out: locking three-pin XLR
Input voltage: 90 to 250V AC,
Fuse: T2A
Maximum power consumption: 26w
Power Linkable; For UK models an EU linking power plug is provided
Contact
China Laser Shop
YSA 310-598-7412
UK 020-8002-9884
AU 03-90125249
