BMC Flat-Bed Paddy Dryer with Rice Husk Furnace
Designed and developed by Engr. Alexis Belonio to provide rice processors a technology for drying paddy especially during harvest season where the weather condition is not favorable for sundrying. Drying of paddy is accomplished inside a bin and hot air from a rice husk furnace is used for drying.
Features:
● Simple in construction ● Easy to operate and maintain ● Less labor is required ● Rice husk or other biomass can be used as fuel ● Dries paddy uniformly and with high quality ● Uses engine or electric motor to drive the fan ● Also available in other sizes
Specifications:
Model: FBD-6T
Drying Chamber: Concrete - 0.3 m high x 4.8 m wide x 7.2 m long
Plenum Chamber: Concrete - 1.2 m high x 4.8 m wide x 7.2 m long
Heating Device: Inclined Grate Furnace Model 44W (with heat exchanger)
Air Moving Device: 80 cm Vane Axial Fan
Power Source: 5 to 7 hp electric motor single phase
Loading: Manual loading and unloading
Labor Requirement: One (1) person to check dryer operation
Drying Temp.: 40-50 C
Drying Capacity: 6 tons per batch
Drying Time: 10 to 14 hours depending on the moisture content of the product, ambient condition, loading capacity
Drying Bed: 2 mm f perforated BI sheet
Construction Materials: Concrete, Metals sheets and angle bars
Finish: Red oxide and triton enamel paint
For contacts and inquiries:
Mr. Michael Belonio
Email: Biz.bulacan@gmail.com
Mhbelonio@yahoo.com or Atbelonio@yahoo.com
