Observe the pointy end of the dipstick and check if the oil on it is below the line that’s marked “full.” When that is the case, add a small amount of oil, about less than a quarter of a quart, using a funnel. There are a lot of dipsticks that simply have two lines with a cross hatch design in between. The oil should be halfway between these lines.
Unscrew the oil filler cap tin order for you to add the oil. If there is a need for more, then add more oil. But be careful when adding oil as it is easy to fill it up but it’s rather difficult to remove it if you add just a little bit too much oil. Then, put the oil filler cap back on and there you have it, you have just successfully changed your oil!
Simple as though it may be and you might think that a lot of car owners already know this but you’d be surprised on how many car owners still go to repair shops or car shops to have their engine oils checked and other car parts. This must be done properly in order to create an accurate reading and for you to know exactly what to do if there’s too much or too little oil.
The oil lubricating system is a closed system as the oil does not get used up or does not go anywhere. If it is at an all-time low, there’s a great possibility for oil leaks to occur. These leaks always get worse and if the engine loses too much of it, auto parts will soon get damaged. Auto Engine Oil You don’t want that to happen as repairs will cost way more than by simply properly checking your car’s engine oil. Checking the oil of your engine is important. But when checking it, you don’t have to be like a measuring stick. Anyone could check their engine oil like a professional mechanic by following simple steps.
Be sure to first warm up your engine if you’re planning to check your car’s oil. This is because when oil is hot, it expands and when it’s cold, it contracts. These differences in temperature will give different results so be sure to just check the oil when engine is warm. Also, be sure to park your car on a leveled surface. After that, turn off the engine. Open up your car’s hood and look for the dipstick. This is the long piece of metal with a loop at one end that sticks out of the engine. Leading Lubricants India You can usually find this close to the spark plugs. Just take out this dipstick and clean up the oil on the dipstick with a paper towel or rag. Replace the clean dipstick but be sure to push it all the way in for accuracy, then pull it back and hold it in front of you in a horizontal position.
Believe me it is more important to be more concerned with the levels of oil instead of its appearance. If an engine is burning lot of oil, it needs the replacement of worn valves, piston rings or other concerning parts. If the oil is not sufficient in the engine, it means there is not enough lubrication in the parts of engine that it needs. It also makes a car engine works hotter and it’s not good for a car you own.
